| Фото | Назва | Виробник | Інформація |
Доступність |
Ціна без ПДВ |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
ABS+175B1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)BLACK Packaging: Box Color: Black Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
товар відсутній |
|||||||||
 |
ABS+175CW1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)COLD WHIT Packaging: Box Color: White Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
на замовлення 30 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
ABS+175G1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)GREEN Packaging: Box Color: Green Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
на замовлення 2 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
ABS+175H1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)GRAY Packaging: Box Color: Gray Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
товар відсутній |
|||||||||
 |
ABS+175O1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)ORANGE Packaging: Box Color: Orange Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
товар відсутній |
|||||||||
 |
ABS+175R1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)RED Packaging: Box Color: Red Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
на замовлення 47 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
ABS+175S1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)SILVER Packaging: Box Color: Silver Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
на замовлення 30 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
ABS+175U1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)BLUE Packaging: Box Color: Blue Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
товар відсутній |
|||||||||
 |
ABS+175Y1 | eSUN |
Description: ESUN ABS (1.75MM,1000G)YELLOW Packaging: Box Color: Yellow Tensile Strength: 40Mpa Operating Temperature: 230°C ~ 270°C Density: 1.06g/cm³ Filament Material: ABS (Acrylonitrile Butadiene Styrene) Filament Diameter: 0.070" (1.75mm) Flex Strength: 68Mpa |
товар відсутній |
|||||||||
 |
PETG175G1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)GREEN Packaging: Box Color: Green Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
на замовлення 4 шт: термін постачання 21-31 дні (днів) |
|||||||||
 |
PETG175M1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)MAGENTA Packaging: Box Color: Magenta Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175N1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)NATURE Packaging: Box Color: Natural Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SB1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID BL Packaging: Box Color: Black Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SG1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID GR Packaging: Box Color: Green (Solid Green) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SH1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID GR Packaging: Box Color: Green (Solid Green) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SJ1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID GO Packaging: Box Color: Gold (Solid Gold) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
на замовлення 8 шт: термін постачання 21-31 дні (днів) |
|||||||||
 |
PETG175SR1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID RE Packaging: Box Color: Red (Solid Red) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SS1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID SI Packaging: Box Color: Silver (Solid Silver) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SU1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID BL Packaging: Box Color: Blue (Solid Blue) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SW1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID WH Packaging: Box Color: White (Solid White) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SY1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID YE Packaging: Box Color: Yellow (Solid Yellow) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175SZ1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)SOLID PU Packaging: Box Color: Purple (Solid Purple) Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175U1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)BLUE Packaging: Box Color: Blue Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PETG175Y1 | eSUN |
Description: ESUN PETG (1.75MM,1000G)YELLOW Packaging: Box Color: Yellow Tensile Strength: 52.2Mpa Operating Temperature: 230°C ~ 250°C Part Status: Active Density: 1.27g/cm³ Filament Material: PETG (Polyethylene Terephthalate Glycol-modified) Filament Diameter: 0.070" (1.75mm) Flex Strength: 58.1Mpa |
товар відсутній |
|||||||||
 |
PLA+175B1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)BLACK Packaging: Box Color: Black Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
на замовлення 46 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
PLA+175BG1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)BEIGE Packaging: Box Color: Beige Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
на замовлення 80 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
PLA+175C1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)BROWN Packaging: Box Color: Brown Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175CW1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)COLDWHITE Packaging: Box Color: White Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175G1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)GREEN Packaging: Box Color: Green Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175H1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)GREY Packaging: Box Color: Gray Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175J1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)GOLD Packaging: Box Color: Gold Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
на замовлення 9 шт: термін постачання 21-31 дні (днів) |
|
||||||||
 |
PLA+175O1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)ORANGE Packaging: Box Color: Orange Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175P1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)PINK Packaging: Box Color: Pink Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175R1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)RED Packaging: Box Color: Red Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175S1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)SILVER Packaging: Box Color: Silver Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175V1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)PEAKGREEN Packaging: Box Color: Peak Green Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Part Status: Active Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175WW1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)WARMWHITE Packaging: Box Color: White Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175Y1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)YELLOW Packaging: Box Color: Yellow Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
|||||||||
 |
PLA+175Z1 | eSUN |
Description: ESUN PLA+(1.75MM,1000G)PURPLE Packaging: Box Color: Purple Tensile Strength: 63Mpa Operating Temperature: 210°C ~ 230°C Density: 1.23g/cm³ Filament Material: PLA (Polylactide) Filament Diameter: 0.070" (1.75mm) Flex Strength: 74Mpa |
товар відсутній |
| ABS+175B1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)BLACK
Packaging: Box
Color: Black
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)BLACK
Packaging: Box
Color: Black
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
товар відсутній
| ABS+175CW1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)COLD WHIT
Packaging: Box
Color: White
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)COLD WHIT
Packaging: Box
Color: White
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
на замовлення 30 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1289.08 грн |
| 10+ | 1128.69 грн |
| 25+ | 1091.1 грн |
| ABS+175G1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)GREEN
Packaging: Box
Color: Green
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)GREEN
Packaging: Box
Color: Green
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
на замовлення 2 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1271.11 грн |
| ABS+175H1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)GRAY
Packaging: Box
Color: Gray
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)GRAY
Packaging: Box
Color: Gray
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
товар відсутній
| ABS+175O1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)ORANGE
Packaging: Box
Color: Orange
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)ORANGE
Packaging: Box
Color: Orange
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
товар відсутній
| ABS+175R1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)RED
Packaging: Box
Color: Red
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)RED
Packaging: Box
Color: Red
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
на замовлення 47 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1289.08 грн |
| 10+ | 1128.69 грн |
| 25+ | 1091.1 грн |
| ABS+175S1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)SILVER
Packaging: Box
Color: Silver
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)SILVER
Packaging: Box
Color: Silver
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
на замовлення 30 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1289.08 грн |
| 10+ | 1128.69 грн |
| 25+ | 1091.1 грн |
| ABS+175U1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)BLUE
Packaging: Box
Color: Blue
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)BLUE
Packaging: Box
Color: Blue
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
товар відсутній
| ABS+175Y1 |
Виробник: eSUN
Description: ESUN ABS (1.75MM,1000G)YELLOW
Packaging: Box
Color: Yellow
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
Description: ESUN ABS (1.75MM,1000G)YELLOW
Packaging: Box
Color: Yellow
Tensile Strength: 40Mpa
Operating Temperature: 230°C ~ 270°C
Density: 1.06g/cm³
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 68Mpa
товар відсутній
| PETG175G1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)GREEN
Packaging: Box
Color: Green
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)GREEN
Packaging: Box
Color: Green
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
на замовлення 4 шт:
термін постачання 21-31 дні (днів)| PETG175M1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)MAGENTA
Packaging: Box
Color: Magenta
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)MAGENTA
Packaging: Box
Color: Magenta
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175N1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)NATURE
Packaging: Box
Color: Natural
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)NATURE
Packaging: Box
Color: Natural
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SB1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID BL
Packaging: Box
Color: Black
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID BL
Packaging: Box
Color: Black
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SG1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID GR
Packaging: Box
Color: Green (Solid Green)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID GR
Packaging: Box
Color: Green (Solid Green)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SH1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID GR
Packaging: Box
Color: Green (Solid Green)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID GR
Packaging: Box
Color: Green (Solid Green)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SJ1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID GO
Packaging: Box
Color: Gold (Solid Gold)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID GO
Packaging: Box
Color: Gold (Solid Gold)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
на замовлення 8 шт:
термін постачання 21-31 дні (днів)| PETG175SR1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID RE
Packaging: Box
Color: Red (Solid Red)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID RE
Packaging: Box
Color: Red (Solid Red)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SS1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID SI
Packaging: Box
Color: Silver (Solid Silver)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID SI
Packaging: Box
Color: Silver (Solid Silver)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SU1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID BL
Packaging: Box
Color: Blue (Solid Blue)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID BL
Packaging: Box
Color: Blue (Solid Blue)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SW1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID WH
Packaging: Box
Color: White (Solid White)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID WH
Packaging: Box
Color: White (Solid White)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SY1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID YE
Packaging: Box
Color: Yellow (Solid Yellow)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID YE
Packaging: Box
Color: Yellow (Solid Yellow)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175SZ1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)SOLID PU
Packaging: Box
Color: Purple (Solid Purple)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)SOLID PU
Packaging: Box
Color: Purple (Solid Purple)
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175U1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)BLUE
Packaging: Box
Color: Blue
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)BLUE
Packaging: Box
Color: Blue
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PETG175Y1 |
Виробник: eSUN
Description: ESUN PETG (1.75MM,1000G)YELLOW
Packaging: Box
Color: Yellow
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
Description: ESUN PETG (1.75MM,1000G)YELLOW
Packaging: Box
Color: Yellow
Tensile Strength: 52.2Mpa
Operating Temperature: 230°C ~ 250°C
Part Status: Active
Density: 1.27g/cm³
Filament Material: PETG (Polyethylene Terephthalate Glycol-modified)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 58.1Mpa
товар відсутній
| PLA+175B1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)BLACK
Packaging: Box
Color: Black
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)BLACK
Packaging: Box
Color: Black
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
на замовлення 46 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1401.17 грн |
| 10+ | 1226.94 грн |
| 25+ | 1186.01 грн |
| PLA+175BG1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)BEIGE
Packaging: Box
Color: Beige
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)BEIGE
Packaging: Box
Color: Beige
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
на замовлення 80 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1381.77 грн |
| 10+ | 1209.99 грн |
| 25+ | 1169.65 грн |
| 50+ | 1059.81 грн |
| PLA+175C1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)BROWN
Packaging: Box
Color: Brown
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)BROWN
Packaging: Box
Color: Brown
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175CW1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)COLDWHITE
Packaging: Box
Color: White
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)COLDWHITE
Packaging: Box
Color: White
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175G1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)GREEN
Packaging: Box
Color: Green
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)GREEN
Packaging: Box
Color: Green
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175H1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)GREY
Packaging: Box
Color: Gray
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)GREY
Packaging: Box
Color: Gray
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175J1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)GOLD
Packaging: Box
Color: Gold
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)GOLD
Packaging: Box
Color: Gold
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
на замовлення 9 шт:
термін постачання 21-31 дні (днів)| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1401.17 грн |
| PLA+175O1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)ORANGE
Packaging: Box
Color: Orange
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)ORANGE
Packaging: Box
Color: Orange
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175P1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)PINK
Packaging: Box
Color: Pink
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)PINK
Packaging: Box
Color: Pink
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175R1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)RED
Packaging: Box
Color: Red
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)RED
Packaging: Box
Color: Red
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175S1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)SILVER
Packaging: Box
Color: Silver
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)SILVER
Packaging: Box
Color: Silver
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175V1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)PEAKGREEN
Packaging: Box
Color: Peak Green
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Part Status: Active
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)PEAKGREEN
Packaging: Box
Color: Peak Green
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Part Status: Active
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній
| PLA+175WW1 |
Виробник: eSUN
Description: ESUN PLA+(1.75MM,1000G)WARMWHITE
Packaging: Box
Color: White
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
Description: ESUN PLA+(1.75MM,1000G)WARMWHITE
Packaging: Box
Color: White
Tensile Strength: 63Mpa
Operating Temperature: 210°C ~ 230°C
Density: 1.23g/cm³
Filament Material: PLA (Polylactide)
Filament Diameter: 0.070" (1.75mm)
Flex Strength: 74Mpa
товар відсутній